1 Meter CAN Extension Cable, 5 Pin Male-5 Pin Female
1 meter/39" 5 position CAN extension cable. For use between any AIM CAN devices. AiM SKU V02552700.
$ 50.00
1.5m K Type, 3 Pin Patch Cable for TC Hub
1.5m/59" thermocouple patch cables for use with AIM's Thermocouple Expansion Hub. This 3 pin K-type patch cable is different from the 4 pin K-type patch cable used by the EVO4...
$ 39.00
1.5M K-Type to 719 Patch Cable
1.5 meter/59" K-type thermocouple patch cable with plastic 719 Binder connector for use with MXL2, MXS, MXG, MXL Pista and MXL Pro. AiM SKU V02CCB15M.
$ 40.00
1.5M K-Type to K-Type Cable
1.5meter/59" K-type extension cable. For use between thermocouple sensors such as EGT or CHT and any AIM K-type patch cable. AiM SKU V02CCM15M.
2 Meter CAN Extension Cable, 5 Pin Male-5Pin Female
2 meter/78" 5 position male/female CAN extension cable. For use between any AIM CAN devices. AiM SKU V02552720.
22 Pin Expansion Harness for MXL2/MXS/MXP/MXG
22 pin expansion harness for MXL2, MXS, MXP and MXG is wired for 4 analog channels, 3 digital speed channels and unterminated wire leads for RS232 ECU, 2nd CAN input...
$ 400.00
22 Pin Expansion Harness with 1 Thermocouple
22 pin expansion harness for MXL2, MXS, MXP and MXG is wired for 3 analog channels, 1 Thermocouple channel, 3 digital speed channels and unterminated wire leads for RS232 ECU,...
22 Pin Expansion Harness with 2 Thermocouples
22 pin expansion harness for MXL2, MXS, MXP and MXG is wired for 2 analog channels, 2 Thermocouple channels, 3 digital speed channels and unterminated wire leads for RS232 ECU,...
37 Pin Main Harness for MXL2/MXS/MXG
37 pin main harness for MXL2, MXS and MXG is wired for 4 analog channels,1 digital speed channel, USB communication, CAN Expansion, IR Lap Beacon and unterminated wire leads for...
$ 490.00
37 Pin Main Harness with 1 Thermocouple
37 pin main harness for MXL2, MXS, MXP and MXG is wired for 3 analog channels, 1 Thermocouple channel, 1 digital speed channel, USB communication, CAN Expansion, GPS and unterminated...
$ 425.00
37 Pin Main Harness with 2 Thermocouples
37 pin main harness for MXL2, MXS, MXP and MXG is wired for 2 analog channels, 2 Thermocouple channels, 1 digital speed channel, USB communication, CAN Expansion, GPS and unterminated...
5" MXS Color Dash with GPS Module
The MXS has an aluminum case, 5" TFT color display, built-in 3 axis G, gyro (yaw), and magnetometer (compass) sensors, 10 user configurable RGB shift LEDs, 5 RGB alarm LEDs,...
$ 2,599.00
6" MXP 1.3 Color Dash Logger with GPS Module
The MXP has an aluminum case, 6" TFT color display, built-in 3 axis G, gyro (yaw), and magnetometer (compass) sensors, 10 user configurable RGB shift LEDs, 5 RGB alarm LEDs,...
Active/Squarewave RPM Filter - ARP03
AIM in-line filter is used to clean up a noisy RPM signal between the negative side of the coil and the logger. AiM SKU X05ADRPMM30.
$ 98.00
AiM 719 - 712 Patch Cable
These patch cables have a metal connector on the logger side and a plastic connector on the sensor side for use with EVO4S, EVO4, XG Log data systems and Channel...
AiM 719 - 719 Patch Cable
These patch cables have plastic connectors on both ends and are used on MXG, MXP, MXS, MXL2, as well as MXL Strada/Pista/Pro systems.
$ 30.00
AiM Data Hub, 4 Port CAN Connection
A four port CAN connection device, the Data Hub is used with systems with a single CAN input, but multiple CAN based peripherals. An example where a Data Hub would...
$ 77.00
AiM G/GS-Dash Mounting Bracket
Anodized .063 aluminum bracket for mounting an AiM EVO4 G-Dash on a Momo Model 27 cut top steering wheel.
$ 25.00
Brake Manifold (1/8 NPT & 3/8-24 Ports)
Machined aluminum manifold for 1/8 NPT male brake pressure sensors. Two 3/8-24 ports on the sides, and one 1/8 NPT port on the bottom for the pressure sensor. Bleed screw...
$ 70.00
CAN Male 712 5-Pin to Male 712 5-Pin Cable-2m
This 2 meter/78" 5 pin male metal connector to 5 pin male metal connector cable goes between the SmartyCam GP HD Rev 2.2 and the CAN expansion port any AiM...