AiM Products

This cable connects the AIM EVO4 to all non ECU RPM pickups - existing square wave tach signal, negative side of coil, and certain motorcycle K-line ECU's. Check AiM's web...

EVO4S CAN ECU cable - 7 feet long with 7-pin male Binder 712 connector on one end and flying leads for CAN+, CAN- and Ground.

OBDII (CAN + K-Line) Cable

The EVO4S power cable is 3'-6" long and has a 2 pin 712 male connector on the logger end and spade terminals for 12V power and ground connections on the...

5 pin 712 male with 59"/1.5m flying leads for RPM (square wave tach signal or low voltage negative side of the coil pickup), digital output (control external devices such as...

AiM 3 pin to USB download cable for EVO4S, EVO4 and ECU Bridge units. 8' cable length. AiM SKU V02563030.

22 pin expansion harness for EVO5 is wired for 4 analog channels, 3 digital speed channels and unterminated wire leads for RS232 ECU, 2nd CAN input and Digital output. The...

37 pin main harness for MXL2, MXS, MXP and MXG is wired for 2 analog channels, 2 Thermocouple channels, 1 digital speed channel, USB communication, CAN Expansion, GPS and unterminated...

The EVO5 data logger has an aluminum case with 4GB of on board memory, built-in 3 axis G sensor, built-in 3 axis gyro (yaw) sensor and two mil-spec connectors. The...

Connects to any AiM logger  with a CAN expansion port and the SmartyCam GP HD Rev 2.2.  GPS09 is more precise: while GPS08 included GPS satellite signal and Global Navigation...

This 5" x 3-1/4" display is ideal for formula cars, sports racers and motorcycles, but it only works with the newer generation EVO4S and EVO5 data loggers. It's fully configurable...

Standard IR beacon for an MXL Pista (9'-8" cable) with metal connector. Can also be used with XG Log.

AIM IR beacon with plastic 719 connector. 9'-8" cable length.

IR beacon with plastic connector for use with MyChron 3 Gold, Plus and MXL Pro. 32 inch cable length.

AIM's LCU-One includes a wideband lambda controller module, Bosch LSU 4.9 sensor and weld-in bung. This model connects to the logger through via the CAN expansion port or Data Hub....

Replacement magnet in 4mm brass sleeve with M4 threaded post for use with AiM magnetic wheel speed sensors.

Screw on metal cap protects unused ports on various AiM products such as Channel Expansion Hub, Data Hub, TC Hub, EVO4S, EVO4 and XG Log systems.

Replace your AiM EVO4S or EVO4 USB communication cable with a bulkhead mount USB port for a mini USB cable. Custom made to your specified length up to 6' in...

12 inch wiring adapter for tapping into throttle and gear position sensor signal wires on motorcycle engines with OEM sensors. Includes "Vampire Clamp" for connection to signal wire, but AIM...

The MXG 1.2 has an aluminum case, 7" color TFT display, built-in 3 axis G and gyro senors, 10 user configurable RGB shift LEDs, 8 RGB alarm LEDs, and 4GB...